The Acousticom 2 microwave detetor
(Made in UK)
Description:
The Acousticom 2 is our newest microwave detector. It presents RF measurements as an audio signal, with LEDs and an alarm at high levels of RF (you can also switch the sound off if you prefer to be less obvious when taking readings). With simple controls, easy to read results, but still using the same advanced microwave detector as our Acoustimeter, this instrument is perfect for those on a budget. It is smaller and lighter than the Acoustimeter, and comes in its own carry pouch.
Specifications:
- A line of coloured LEDS displaying Peak exposure levels in V/m
- Measurement range: 200 - 8 000 MHz ±6 dB (typical accuracy)
- Sensitivity (Peak Display): 0.01 - 6.00 volts per metre (V/m)
0.01 0.02 0.05 0.1 0.3 1.0 3.0 6.0 V/m;
(equialent to 0.5 to 100,000 peak µW/m2)
- Some intermediate points when two LEDs are both lit are also defined: 0.2 0.6 2.0 4.5 V/m
- The speaker may be switched on and off
- An alarm sounder at higher exposure levels (may be disabled)
- Power source: 1x PP3/MN1604 9 volt Alkaline or Rechargeable
- Power draw: 40 to 90 mA (depends on the sound volume)
- Battery life: Up to 10 hours continuous with normal alkaline battery
» Low battery indicator light (the green 'on' light turns red)
- Size (mm): 110 x 63 x 21 (LxWxD);
- Weight: 140g incl. battery
Package consists:
- The Acousticom 2
- Info and Manual
- Carry Pouch
One Year Manufacturer Warranty
The Acousticom 2 microwave detetor
(Made in UK)
Description:
The Acousticom 2 is our newest microwave detector. It presents RF measurements as an audio signal, with LEDs and an alarm at high levels of RF (you can also switch the sound off if you prefer to be less obvious when taking readings). With simple controls, easy to read results, but still using the same advanced microwave detector as our Acoustimeter, this instrument is perfect for those on a budget. It is smaller and lighter than the Acoustimeter, and comes in its own carry pouch.
Specifications:
- A line of coloured LEDS displaying Peak exposure levels in V/m
- Measurement range: 200 - 8 000 MHz ±6 dB (typical accuracy)
- Sensitivity (Peak Display): 0.01 - 6.00 volts per metre (V/m)
0.01 0.02 0.05 0.1 0.3 1.0 3.0 6.0 V/m;
(equialent to 0.5 to 100,000 peak µW/m2)
- Some intermediate points when two LEDs are both lit are also defined: 0.2 0.6 2.0 4.5 V/m
- The speaker may be switched on and off
- An alarm sounder at higher exposure levels (may be disabled)
- Power source: 1x PP3/MN1604 9 volt Alkaline or Rechargeable
- Power draw: 40 to 90 mA (depends on the sound volume)
- Battery life: Up to 10 hours continuous with normal alkaline battery
» Low battery indicator light (the green 'on' light turns red)
- Size (mm): 110 x 63 x 21 (LxWxD);
- Weight: 140g incl. battery
Package consists:
- The Acousticom 2
- Info and Manual
- Carry Pouch
One Year Manufacturer Warranty
